GB ∅12 E-Lock
GB ∅12 charging socket actuator (e-lock): 12 VDC, 400 ms actuation, ≥30 N push-pull, 6.2 mm stroke, IP67, 60,000 cycles.
詳細を見る →
GB E-Lock (Push-Rod)
GB E-Lock (Front Push-Rod)
GB front push-rod e-lock: no lanyard, front push-rod design; 12 VDC, 300 ms actuation, ≥35 N push-pull, stroke 6.2/7.5 mm, IP67, 60,000 cycles.
特長
- Front push-rod design, no lanyard
- Stroke 6.2 mm or 7.5 mm
- 300 ms actuation
- Modular connector interface, no lanyard required
- IP67 static protection, 60,000 cycles
技術仕様
本型式の既知パラメータです。「参考」は業界の代表値であり、技術合意が優先されます。
| パラメータ | 仕様 |
|---|---|
| Operating temperature | -40 °C to 85 °C |
| Rated current | Motor ≤1.5 A; signal switches ≤0.1 A |
| Stall current / time | Motor ≤2 A (12 V); stall time ≤1 min |
| Actuating time | 300 ms (12 VDC) |
| Actuator push-pull | ≥35 N (12 VDC) |
| Emergency release | ≤20 N (front push-rod, no lanyard) |
| Stroke | 6.2 mm or 7.5 mm |
| Modular design | Connector interface / no lanyard required |
同カテゴリの代表参考パラメータ
| パラメータ | 仕様 |
|---|---|
| Rated voltage | 12 VDC (operating 9–16 VDC) |
| Protection class | IP67 (static) |
| Durability | 60,000 cycles |
| Stall time | ≤1 min |
参考値は公開規格（GB/T 20234、IEC 62196、IEC 60529、ISO 26262 など）に基づく選定用の情報であり、検収基準ではありません。
特長
- Front push-rod design, no lanyard
- Stroke 6.2 mm or 7.5 mm
- 300 ms actuation
- Modular connector interface, no lanyard required
- IP67 static protection, 60,000 cycles
関連製品
EU E-Lock (Lanyard Release)
EU charging socket actuator (e-lock), lanyard-release type: 12 VDC, 300 ms actuation, ≥60 N push-pull, emergency release ≤40 N, 6 mm stroke, IP67, 60,000 cycles; modular connector interface.
詳細を見る →